Open Draft for Discussion
Open Scrubs Specification
What makes good scrubs “good” can be measured. This draft brings together, in one table, the criteria a healthcare uniform fabric should be assessed on — and the standard test method for each.
Draft v1 · October 2026
Why now?
Hekim Birliği Sendikası (a Turkish physicians' union) announced that, in line with a decision of its Central Executive Board dated 22 September 2026, it is continuing its “no-scrubs” protest. The union is calling for a binding technical specification valid nationwide and for the uniforms being issued to be examined in independent laboratories.
The debate is often carried on with unmeasurable statements such as “the fabric is bad” or “the fabric is good”. Yet breathability, pilling, colour fastness and shrinkage after washing each have established standard test methods. We have gathered them into an open draft anyone can use.
This page is not an official or legal specification; it is a proposal meant to give institutions, unions and manufacturers a common language. Standard numbers refer to ISO/EN standards as adopted by the Turkish Standards Institution (TSE).
Criteria and test methods
| Group | Criterion | Standard test method | Why it matters |
|---|---|---|---|
| Comfort | Air permeability | TS EN ISO 9237 | Measures how much air passes through the fabric — the key value behind feeling overheated on a long shift. |
| Comfort | Water-vapour resistance (Ret) | TS EN ISO 11092 | Shows how easily sweat escapes as vapour — the measurable counterpart of “breathability”. |
| Comfort | Stretch and recovery | TS EN ISO 20932-1 | Measures how far the fabric stretches when you bend and reach, and whether it recovers — predicting bagging at knees and elbows. |
| Durability | Pilling | TS EN ISO 12945-2 | Grades the bobbles friction creates on the surface — the most common reason uniforms look worn so quickly. |
| Durability | Tensile strength | TS EN ISO 13934-1 | Measures the fabric's resistance to pulling force. |
| Durability | Tear strength | TS EN ISO 13937-2 | Measures how easily a tear spreads once started — important around pocket openings and seams. |
| Durability | Seam slippage | TS EN ISO 13936-1 | Measures whether yarns slip and open up at the seams. |
| Washing | Dimensional change after washing | TS EN ISO 5077 (TS EN ISO 6330 washing) | Measures how much the garment shrinks or stretches after washing — whether the size will change over time. |
| Colour | Colour fastness to washing | TS EN ISO 105-C06 | Grades how much colour bleeds and fades in the wash — needed to keep an institutional colour code. |
| Colour | Colour fastness to perspiration | TS EN ISO 105-E04 | Measures whether colour changes in contact with sweat. |
| Colour | Colour fastness to rubbing | TS EN ISO 105-X12 | Measures whether colour transfers to other surfaces under dry and wet rubbing. |
| Chemical safety | pH value | TS EN ISO 3071 | Shows whether fabric in long contact with skin sits in a skin-friendly pH range. |
| Chemical safety | Free formaldehyde | TS EN ISO 14184-1 | Measures formaldehyde that may remain from fabric finishing. |
| Appearance | Opacity | No single widely adopted standard; light-transmission measurement with a spectrophotometer is recommended | Fabric becoming see-through in light colours and when bending is one of the complaints healthcare workers raise most often. |
Threshold values
This draft deliberately gives no threshold values. What counts as “sufficient” only becomes meaningful when healthcare workers, unions, institutions and manufacturers set it together. Send us your proposal and we will include it in the next version.
A call to manufacturers and brands
We invite everyone who makes fabric and uniforms to publish their independent laboratory results using the methods in this table, in the same format. Comparable data serves healthcare workers best.
Send your proposal